Leave Your Message

6-10kV Oil Immersed Distribution Transformer - High-Performance China Factory & Suppliers for Energy Saving Solutions

,

    Product Features

    1. Our company's improved oil immersed distribution transformer iron core is made of imported high-quality cold-rolled silicon steel sheets stacked together, greatly reducing no-load losses and no-load currents. The iron core is tied to ensure its compactness and reduce noise.
    2. The transformer connection group adopts the Dyn11 wiring method to reduce the impact of harmonics on the power grid and improve the quality of power supply.
    3. The transformer is a fully sealed structure that extends its service life, eliminates the need for hanging cores, and requires no maintenance.
    4. The high and low voltage windings are made of oxygen free copper. For low voltage windings of 500kVA and below, a double-layer cylindrical structure is used. For windings of 630kVA and above, a double helix or four helix structure is used. For high voltage windings, a multi-layer cylindrical structure is used.
    6-10kV series oil immersed distribution transformer (1)
    6-10kV series oil immersed distribution transformer (2)
    6-10kV series oil immersed distribution transformer (3)

    Transformer Standards

    GB 1094.1-2013: GB 1094.2-2013
    GB 1094.3-2017: GB 1094.5-2008
    GB/T 6451-2015: GB 7595-2017
    GB/T 25289-2010: GB 3837-2016

    Transformer Service Conditions

    Normal Service Conditions
    • The height above the sea level is below 1000m
    • Ambient temperature:
    • Highest air temperature +40℃
    • Highest daily average air temperature +30℃
    • Highest annual average air temperature +20℃
    • Lowest outdoor air temperature -25℃
    Special Service Conditions
    • The height above the sea level is above 1000m
    • Ambient temperature:
    • Highest air temperature is above 40℃
    • Lowest air temperature Lower than 25℃

    Ordering Instructions

    When placing an order, the product model, rated capacity, high and low voltage ratings, high voltage tap range, number of phases, frequency, and connection group number should be provided.

    Transformer Model description

    Transformer Model description (1)
    Transformer Model description (2)
    Transformer Model description (3)

    Frequently Asked Questions

    What are the main features of the oil immersed distribution transformer?
    Our transformer features an iron core made of imported high-quality cold-rolled silicon steel sheets to reduce no-load losses, a fully sealed structure for zero maintenance, and high and low voltage windings made of oxygen-free copper.
    What wiring method does the transformer connection group use?
    The transformer connection group adopts the Dyn11 wiring method. This is specifically designed to reduce the impact of harmonics on the power grid and improve the overall quality of the power supply.
    Does this transformer require regular core maintenance?
    No, the transformer is built with a fully sealed structure that extends its service life, eliminates the need for hanging cores, and requires absolutely no maintenance.
    What are the normal operating temperatures and altitudes for this transformer?
    Under normal service conditions, the transformer operates at heights below 1000m above sea level, with ambient temperatures ranging from a lowest outdoor air temperature of -25℃ up to a highest air temperature of +40℃.
    What structure is used for the high and low voltage windings?
    For low voltage windings of 500kVA and below, a double-layer cylindrical structure is used. For 630kVA and above, a double or four helix structure is used. For high voltage windings, a multi-layer cylindrical structure is applied.
    What information is required when placing an order?
    When placing an order, you should provide the product model, rated capacity, high and low voltage ratings, high voltage tap range, number of phases, frequency, and the connection group number.

    Leave Your Message