0102030405
6~10kV SCB Series Dry-Type Transformer - Reliable Fire-Resistant Power Solutions from China Suppliers and Factory
Product Features
Low loss, low operating costs, and significant energy-saving effects.
Flame retardant, fire-resistant, explosion-proof, and pollution-free.
Good moisture resistance and strong heat dissipation ability.
Low partial discharge, low noise, maintenance free.
High mechanical strength, strong short-circuit resistance, and long service life.
Structure
3.1 Iron core
The iron core is made of high-quality oriented cold-rolled silicon steel sheet material, with a 450 full diagonal joint structure. The core columns are tied with insulating tape, and the surface of the iron core is sealed with insulating resin paint to prevent moisture and rust. The clamps and fasteners are surface treated to prevent rust.
In addition, Andeli has introduced fully automatic online iron core stacking equipment, which meets the high-precision, high-efficiency, and high standard requirements for iron core stacking in the production process, effectively reducing no-load losses, no-load currents, and iron core noise.
3.2 Low voltage foil coil
For low voltage and high current coils, the short-circuit stress is relatively high during short circuit, and the number of low-voltage turns is small. The larger the low-voltage current, the more prominent the problem of unstable ampere turns when using wire winding. The heat dissipation problem also needs to be considered. At this time using foil winding for low voltage can better solve the above problems.
Firstly, foil products do not have axial turns and axial winding helix angles, and the ampere turns of high and low voltage windings are balanced. During short circuit, the axial stress of the transformer is relatively small. Secondly, due to their thin insulation and easy installation of multi-layer air ducts in the process, the heat dissipation problem can also be well solved.
Our low-voltage foil coils are automatically wound on the automatic foil winding machine produced by STOLLBERG company in France. The internal welding is carried out on the winding machine using argon gas protection welding, which has high precision, low welding resistance, and no external welding process. DMD insulation is used between winding layers, and the rear end is sealed and cured with resin after winding.
3.3 High voltage casting coil
Main materials and characteristics:
The coil uses F-grade insulated copper wire as the conductor, and glass fiber and epoxy resin composite material as the insulation. Its coefficient of expansion is similar to that of copper conductor, and it has good impact resistance, temperature change resistance, and crack resistance. All components of glass fiber and epoxy resin have self extinguishing properties, do not sustain combustion, and do not produce toxic gases or pollute the environment. Epoxy resin has good insulation properties and is particularly suitable for making high-voltage coils.
3.4 Temperature control device and air cooling system
Temperature control device malfunction alarm, over temperature alarm, over temperature trip, three-phase inspection, start stop fork cooling device and other functions; The air cooling system adopts a cross flow top blowing cooling fan, which has low noise and high air pressure. The attractive appearance and other features enhance the overload capacity of the transformer. The temperature control adopts an intelligent temperature controller, which improves the safety and reliability of the voltage regulator operation.
3.5 Schematic diagram of incoming line method
Distribution transformers can be manufactured with conventional outgoing lines, standard enclosed busbar outgoing lines, and standard side outgoing lines according to different interface forms, and special outgoing lines can also be designed according to user requirements.
3.6 Protect the casing and output busbar
Protect the casing and provide further safety protection for the transformer, with protection levels such as IP20 and IP23. The casing materials include cold-rolled steel plates, stainless steel plates, aluminum alloy plates, etc. for users to choose from. Low voltage outgoing lines use standard bus bars, both side and top outgoing lines can be used, and special appearance methods can also be designed according to user needs.
Transformer Model Description
Transformer Normal Service Conditions
Ambient temperature
Highest air temperature +40℃
Lowest air temperature -5℃
Hottest monthly average temperature +30℃
Hottest yearly average temperature +20℃
Height above sea level is below 1000m
Power supply voltage curve is similar to sine wave
Service Indoor
Outline Dimension Diagram
10KV distribution transformer outline dimension drawing
10KV Distribution Transformer IP20 with Shell Dimensional Drawing
Frequently Asked Questions (FAQ)
What are the main features of your dry-type transformers?
Our dry-type transformers feature low loss, significant energy-saving effects, flame retardant and explosion-proof properties, good moisture resistance, strong heat dissipation, low partial discharge, low noise, and high mechanical strength.
What material is used for the iron core?
The iron core is made of high-quality oriented cold-rolled silicon steel sheet material with a 450 full diagonal joint structure. It is sealed with insulating resin paint to prevent moisture and rust.
Why do you use foil winding for low voltage coils?
Foil winding balances the ampere turns of high and low voltage windings, reducing axial stress during short circuits. It also allows for easier installation of multi-layer air ducts, greatly improving heat dissipation.
Are the high voltage casting coils environmentally friendly?
Yes, the glass fiber and epoxy resin composite materials used have self-extinguishing properties, do not sustain combustion, and do not produce toxic gases or pollute the environment.
What functions does the temperature control device provide?
The intelligent temperature control device provides malfunction alarms, over-temperature alarms, over-temperature trips, three-phase inspection, and controls the start/stop functions of the air cooling system.
What are the normal operating temperature conditions?
The transformer is designed to operate indoors with a highest air temperature of +40℃, a lowest air temperature of -5℃, and a hottest monthly average temperature of +30℃.




