Leave Your Message
News Categories
Featured News

Do you know about transformers?

2026-01-21

During power distribution operations, transformers are indispensable. It is very necessary to be familiar with and master the basic knowledge of transformers. The basic knowledge of transformers is a necessary skill for every power worker!

1.What is a transformer?

In an alternating current circuit, the equipment that raises or lowers the voltage is called a transformer. The transformer can convert any voltage value into the desired voltage value with the same frequency, in order to meet the requirements for power transmission, distribution and usage. 

For example, the electricity generated by power plants has a relatively low voltage level. It needs to be increased in voltage before being transmitted to distant areas where it can be used. The areas where the electricity is used must then be converted back to a usable voltage level through voltage reduction, so as to supply power to equipment and daily electrical appliances.

2. How does a transformer change voltage?

A transformer is made based on electromagnetic induction. It consists of an iron core formed by stacking silicon steel sheets (or silicon steel) and two sets of coils wound around the iron core. The iron core and the coils are mutually insulated from each other, and there is no electrical connection. 

The coil connected to the power supply side of the transformer is called the primary coil (or the primary side), and the coil connecting the transformer to the electrical equipment is called the secondary coil (or the secondary side). When the primary coil of the transformer is connected to an alternating current power supply, changing magnetic lines of force will be generated in the iron core.

Since the secondary coil is wound on the same iron core, the magnetic lines of force cut through the secondary coil, and an induced electromotive force must be generated on the secondary coil, resulting in a voltage appearing at both ends of the coil. Because the magnetic lines of force are alternating, the voltage of the secondary coil is also alternating. Moreover, the frequency is exactly the same as that of the power supply.

3. What are the types of transformer designs?
According to the number of phases, there are single-phase and three-phase transformers. 
According to their uses, there are power transformers, dedicated power supply transformers, voltage regulators, measuring transformers (voltage transformers, current transformers), small power supply transformers (for low-power devices), and safety transformers. 
According to their structure, there are two types: core type and shell type. The coils can be double-wound or multi-wound, and there are also autotransformers. 
According to the cooling method, there are oil-immersed type and air-cooled type.

4.How to ensure that a transformer has a rated voltage output?

If the voltage is too high or too low, it will affect the normal operation and service life of the transformer. Therefore, voltage regulation is necessary. 

The method of voltage regulation is to draw several taps from the primary coil and connect them to the tap changer head. The tap changer head changes the number of turns in the coil by rotating the contacts. By simply changing the position of the tap changer switch, the required rated voltage value can be obtained. It should be noted that voltage regulation is usually carried out after disconnecting the load connected to the transformer.

5.What losses occur in a transformer during operation? How can these losses be reduced?

The losses during the operation of a transformer consist of two parts: 
(1) It is caused by the iron core. When the coil is energized, due to the alternating nature of the magnetic field lines, eddy currents and magnetic hysteresis losses occur in the iron core. These losses are collectively referred to as iron losses. 
(2) It is caused by the resistance of the coil itself. When current flows through the primary and secondary coils of the transformer, there will be energy loss, and this loss is called copper loss. 

The sum of iron loss and copper loss is the total loss of the transformer. These losses are related to the transformer's capacity, voltage and equipment utilization rate. Therefore, when selecting a transformer, it is advisable to make the equipment capacity consistent with the actual usage volume to improve equipment utilization rate. Also, be careful not to let the transformer operate under light load.