Leave Your Message
News Categories
Featured News

What are APF and SVG? What are the differences between them?

2026-03-09

APF (Active Power Filter) and SVG (Static Var Generator) are two important devices used in power systems to improve power quality. In our daily work, we often encounter these two devices. In this lecture, we will focus on their definitions and differences, hoping to be helpful to the majority of electrical workers.

1.What is APF?

Active Power Filter, abbreviated as APF, is a new type of power harmonic control equipment specifically designed using modern power electronics technology and digital signal processing technology based on high-speed DSP (Digital Signal Processor) devices. It consists of two main parts: the instruction current calculation circuit and the compensation current generation circuit. The instruction current calculation circuit continuously monitors the current in the line and converts the analog current signal into a digital signal, which is then sent to the high-speed digital signal processor (DSP) for processing. The signal is processed to separate the harmonics from the fundamental wave, and in the form of pulse width modulation (PWM) signals, it sends driving pulses to the compensation current generation circuit, driving IGBT (Insulated Gate Bipolar Transistor) or IPM power modules to generate a compensation current with the amplitude equal to that of the grid harmonic current and opposite in polarity, injecting it into the grid to compensate or cancel the harmonic current, actively eliminating power harmonics.

2.What is SVG?

Static Var Generator, abbreviated as SVG. Also known as a dynamic reactive power compensation device or static synchronous compensator. The Static Var Generator (SVG) is a reactive power compensation device based on self-commutation power semiconductor converter compensation technology. Its core relies on high-power controllable devices such as IGBT and IGCT, and belongs to the third-generation reactive power compensation technology. It realizes reactive power transformation through high-frequency switching of high-power power electronic devices, specifically for fluctuating loads in the distribution network, to provide rapid and effective dynamic reactive power compensation. It can compensate for voltage fluctuations and flicker, load imbalance, power factor, and harmonics.

3.What are the differences between the two?

The core differences are as follows: 

1.Core Function

APF (Active Power Filter): Its main function is to dynamically filter out harmonic currents in the power system. By real-time detecting the harmonic components in the load current, it generates a compensating current of the same magnitude but opposite direction as the harmonic current, and injects it into the power grid to cancel out the harmonics, thereby purifying the grid current and reducing the impact of harmonics on equipment. It can effectively counter 2-51st harmonics, with THDi dropping from 32.5% to <2.9%. 

SVG (Static Var Generator): Its main function is to dynamically compensate reactive power. By adjusting the phase and amplitude of the output current, it can quickly respond to the reactive power demand of the system, achieving bidirectional compensation of capacitive or inductive reactive power, improving the system's power factor, stabilizing the grid voltage, and reducing reactive power loss. It can respond within 10 milliseconds and maintain a power factor of up to 0.99.

2.Working Principle

APF: Based on power electronic technology and digital signal processing technology, it continuously monitors the load current, extracts harmonic components through algorithms, generates compensation current instructions, and drives power execution devices (such as IGBT) to produce a compensating current that is opposite to the harmonic current, thereby achieving harmonic suppression.

SVG: By using a power semiconductor bridge converter with self-commutation, and by controlling the on-off states of the power electronic devices, the amplitude and phase of the output voltage can be adjusted to generate the required reactive current, thereby achieving dynamic compensation of reactive power.

3.Application Scenarios

APF: Suitable for scenarios with a large number of non-linear loads, such as electronic equipment manufacturing, data centers, variable frequency speed control systems, welding machines, etc. In these scenarios, there is severe harmonic pollution and specialized harmonic control equipment is required. 

SVG: Suitable for scenarios with frequent changes in inductive or capacitive loads, such as motor groups in factory workshops, substations, and new energy charging stations, etc. It is mainly used to improve power factor, stabilize voltage, and balance three-phase currents.

4.Summary
APF stands for "Harmonic Control Expert", dedicated to eliminating harmonic pollution; SVG stands for "Reactive Power Compensation Expert", focusing on addressing reactive power issues. In practical applications, if the power grid simultaneously has insufficient reactive power and harmonic pollution problems, SVG and APF can be combined for use. APF precisely filters out harmonics, and SVG quickly responds to compensate for reactive power, successfully resolving the interference caused by reactive power and harmonics in the distribution system, ultimately achieving "Dynamic Control + Active Defense", strengthening the power safety defense line, and ultimately achieving comprehensive governance of power quality.